Curtain installation method Precautions for curtain installation

There are many well-known brands of curtains in the market. I believe that many friends will know some of them when they buy curtains. Of course, there are many types of curtains, and there are many materials and colors. This gives us a lot of choices when shopping.

There are many well-known brands of curtains in the market. I believe that many friends will know some of them when they buy curtains. Of course, there are many types of curtains, and there are many materials and colors. This gives us a lot of choices when shopping. So do you know how to install curtains? After understanding this problem, let's take a look at the precautions for curtain installation? Only after understanding these two issues, we can better install and use curtains after purchasing curtains.

Curtain installation method

1. First draw a line for positioning, measure the fixed hole distance and the size of the track to be installed, and then install the curtain rail.

2. Then install the hoisting clip. When installing, first rotate the clip 90 degrees to connect with the track, and then install the hoisting clip on the top plate with self-tapping screws.

3. Finally, install the curtain rod, and correct the connection fixture, install the rod or wire, and pull it on the fixture, so that it is flat and the same as the room elevation.

Precautions for curtain installation

1. When there is plaster line on the roof, the installation of the curtain rod should be ten centimeters below the plaster line, so that the plaster line can be flashed out without damaging the decoration, and the upper edge of the curtain can be the closest to the roof, so that the curtain can not be separated from the roof. The roof is too far away.

2. When installing the curtain bracket, pay attention to measure the distance first, and then turn the eye with electricity, so as to avoid the wrong hit or hit, causing unnecessary trouble. 2. For the installation of curtain rod brackets, two brackets should be installed under the rod length of two meters. If the curtain rod is more than two meters long, three brackets or more should be used. At this time, attention should be paid to the distance between the brackets, so that the force can be evenly applied to prevent the rod from falling off. 3. At the nails of the mounting bracket, there should be expansion wires, and aircraft expansion tubes should be used when the force is extremely heavy. The principle is firmness and durability.

3. The installation method and fixing position of the curtain hook. The main function of the curtain hook is to fix the curtain and beautify the curtain. Generally, it should be installed at a height of one meter from the ground and 20 cm from the outermost edge of the curtain. Too high or too low will affect the Curtain effect.